The Wella Climazon Millennium (often referred to as the Climazon 2) is a professional hair processor designed for advanced color and volume treatments. Installing this device requires careful attention to its dual mounting options—pedestal or wall-mounted—to ensure both functionality and safety in a salon environment. 1. Choosing the Mounting Configuration The device is available in two primary installation styles:

Pedestal (Stand) Version: Uses the ST5 tripod base with three rollers. It features a cable holder to secure the power cord within the tripod tube for safety.

Wall-Mounted Version: Typically paired with the Acrobat 2004 wall arm (Type WA04/75 or WA04/95). This setup includes an extension arm and a spring arm for multi-directional movement. 2. Wall Arm Installation & Safety

For wall installations, the Acrobat 2004 manual outlines critical safety measures:

Mounting Points: Must be fixed to a secure surface using approved variants like the WL04 wall bearing or DB04/2 ceiling mount.

Spring Arm Hazard: Caution is required when handling the spring arm. It must be placed in its uppermost stop position during assembly or disassembly to prevent it from snapping up suddenly.

Adjustments: The arm includes two brake screws on the boom and dedicated openings on the spring arm for adjusting load capacity and height stops. 3. Technical Setup & Dimensions

The Climazon Millennium is built for precision, featuring five adjustable infrared heating elements.

Physical Footprint: The mobile pedestal unit stands approximately 1350mm high, with a depth of 850mm and a width of 600mm.

Electrical Connectivity: Ensure the main power switch is accessible. For safety, the unit should be disconnected from the mains during cleaning or maintenance to avoid fire hazards.

Sensor Protection: The unit includes integrated infrared sensors that automatically direct heat away from the client's ears, face, and nape for comfort.

Proper installation ensures the unit can operate its specialized programs, such as "Color Volume by Perform," while maintaining the low energy consumption (up to 50% less than competitors) for which it is known.

The Throne of Color

The salon was dark, save for the streetlights filtering through the front window. Elena stood in the center of the floor, her arms crossed, staring at the pallet that had just arrived. It was the Wella Climazon Millennium—the "Throne of Color," as the sales rep called it.

Her regular dryers were functional, but they were loud, inconsistent, and looked like appliances. This? This was a piece of Italian engineering designed to make clients feel like royalty. But first, it was just a heavy, poly-wrapped puzzle.

"Alright," she muttered, grabbing a box cutter. "Let’s see if you live up to the manual."

Chapter 1: The Foundation

Elena sliced through the packing straps. The first rule of the manual was simple: Inspect the unit. She checked the black curved hood and the control panel for any shipping damage. It was pristine. She smiled; the built-in Ultra Violet lamp glinted under the dim light—a feature specifically designed for colour metabolism.

She dragged the heavy base unit toward styling station number three. The manual was specific about positioning. It needed at least 20 inches of clearance from the wall to allow the hood to recline fully without banging into the mirror. She measured it twice.

"Heads up," she whispered to the empty room, tipping the base onto its back wheels. She aligned the mounting bracket on the bottom of the vertical column with the slot on the base. Click. She tightened the locking screws with a wrench, ensuring the column stood rigid.

Step 2.5 Installing the Air Filter

Never operate the Millennium without a filter – it will incinerate lint and destroy the heating element.

1. Locate the rear air intake (the back of the motor housing).
2. The manual install requires aligning the filter grille tabs with the grooves.
3. Press the grille flat and rotate clockwise until it locks.
4. Wiggle the grille – zero movement indicates correct lock.

Introduction: Understanding the Wella Climazon Millennium

The Wella Climazon Millennium is an icon in professional salons. Unlike standard hood dryers, this model is renowned for its even heat distribution, variable airflow, and durable industrial design. However, its "Millennium" iteration comes with a specific wiring and mounting configuration that differs from domestic dryers.

If you have acquired a new unit or purchased a second-hand model without the original Installation Manual, performing a manual install can seem daunting. This article provides a complete walkthrough. Disclaimer: Always consult a certified electrician for hardwired connections. This guide is for informative purposes based on the official Wella technical specifications.

1. Critical Pre-Installation Requirements (Electrical)

Before installing the Climazon Millennium, verify these electrical specs. Incorrect power will destroy the control board.

• Voltage: Must match the unit’s plate (typically 220-240V AC / 50-60Hz for EU/Asia, or 110V for US/Canada).
• Circuit: Dedicated 16-20 Amp circuit (check local code). Do not use a standard household outlet if the unit has a 3-prong industrial plug.
• RCD/GFCI: Mandatory protection due to proximity to water and wet hair.
• Cord: If replacing the cord, use H05RN-F rubber cord (oil/water resistant), minimum 1.5mm² (AWG 14) for 230V, or 2.5mm² (AWG 12) for 110V.

Unpacking and Inspection

1. Inspect packaging for damage before opening.
2. Uncrate unit on a clean, flat surface.
3. Check unit against packing list: model, serial number, accessories.
4. Report any damage to supplier; do not install a damaged unit.

Step 2.2 Mounting the Wall Bracket

This is the most critical mechanical step. An unlevel bracket will cause the arm to drift or jam.

1. Position the bracket against the wall at your predetermined height. Use a spirit level.
2. Mark four drill holes (top-left, top-right, bottom-left, bottom-right).
3. Drill holes to the depth specified by your rawlplugs (typically 40mm).
4. Insert rawlplugs flush with the wall.
5. Screw the bracket tightly. Do not overtighten – you risk stripping the plug. The bracket must not wobble.

1. Executive Summary

This report outlines the necessary steps, safety precautions, and technical requirements for the installation of the Wella Climazon Millennium hair processing unit. The Climazon Millennium is an advanced, microprocessor-controlled appliance designed to provide precise temperature and airflow control for hair treatments. Due to its electrical complexity and physical bulk, professional installation is highly recommended.

Part 6: Maintenance After Installation

Once your manual install is complete, follow this schedule to keep the Climazon Millenium running for 20+ years:

• Weekly: Wipe the hood interior with a dry cloth. Remove hairspray residue.
• Monthly: Descale the steam generator using a 50/50 water/vinegar run cycle (run for 5 min, rinse).
• Quarterly: Tighten the base bolts and arm pivot. Check the power cord for cracks.
• Annually: Replace the carbon brushes inside the fan motor (if the model has them).