The thyssenkrupp Levant (often branded under TKE or HomeGlide) is a straight-rail stairlift designed for quick installation directly onto the stair treads rather than the wall. Levant Installation Overview
While full technical manuals are often restricted to authorized dealers to ensure safety compliance, the general installation workflow for a Levant straight stairlift involves these core steps:
Rail Preparation: Measure the staircase and cut the aluminum rail to the required length.
Bracket Placement: Secure the support feet (brackets) to the stair treads using lag bolts. Pre-drilling is recommended for wooden stairs to prevent cracking.
Charging System: Install the charging contact strip along the rail and connect the transformer to a standard 220V/110V wall socket.
Drive Unit Mounting: Slide the power pack (motor and carriage) onto the rail. The Levant uses a rack-and-pinion drive system.
Final Assembly: Attach the seat, footrest, and armrest controls. Ensure all safety sensors (anti-crush) and the seat-swivel interlock are functional. Key Technical Manuals & Resources Levant Stairlift User Manual | PDF | Chair - Scribd thyssenkrupp levant stair lift installation manual full
ThyssenKrupp Levant stairlift installation process involves rail assembly, bracket anchoring, and unit testing to ensure safe operation. Note that ThyssenKrupp Access (the original manufacturer) no longer operates in the United States, which may affect the availability of official new parts or direct factory support Levant Installation Overview
Professional installation is typically recommended, but general steps for this model include: Track Pre-assembly
: Lay out the silver track segments and ensure the charging contacts are aligned. Bracket Anchoring
Park the unit in the middle of the track to distribute weight evenly. Tighten brackets securely to the stairs.
Anchor the track by tightening bracket bolts to minimize flex. Electrical Connection
: Connect the transformer to the charging contacts nearest a standard wall socket. Ensure all wiring connections (relays, fuse blocks, and terminals) are tight. Initial Testing The thyssenkrupp Levant (often branded under TKE or
Test unit controls on the chair arm by running the lift a short distance up and down. Verify the operation of upper and lower call/send controls. Check that footrest safety sensors are functional. www.usmedicalsupplies.com Core Components & Controls
The Levant is recognized by its unique wraparound seat and silver track. Key operating parts include: Joystick Control : Located in the armrest for seated operation. Call and Send Stations
: Wireless remotes used to summon the lift from the top or bottom of the stairs. Main Switch
: Used to turn the lift on or off during long periods of non-use. Swivel Handle
: Used to rotate the chair (typically only at the top of the stairs) for safe entry and exit. Safety & Maintenance Weight Limit : The Levant has a maximum weight capacity of Battery Care
: Always park the lift on a charging contact to prevent battery drainage. If the lift emits a continuous audio signal, it may not be charging correctly. Clearing Obstacles insulation resistance >
: Ensure the staircase is clear of objects before each use to avoid triggering safety sensors. Levant stairlift User Manual
Since copyrighted technical manuals (often hundreds of pages long) cannot be reproduced in full here, I have compiled a comprehensive review and operational summary of the thyssenkrupp Levant stair lift installation process.
This review is designed for technicians looking for an overview of the installation logic, or for dealers/homeowners trying to understand the complexity of the unit before purchase.
This document describes step-by-step procedures to install a Thyssenkrupp Levant stair lift on a straight staircase. It covers site preparation, mechanical assembly, electrical connections, functional testing, user training, and routine maintenance.
The Levant has a modular wiring harness. Do the following in order:
The manual mandates that the technician complete: