Skip to Main Content

Lovato 31 Rgam 12 User Manual Page

Lovato 31 RGAM/12 — Quick User-Manual Summary

Introduction

In the world of industrial and commercial power control, reliability is non-negotiable. The Lovato 31 RGAM 12 is a cornerstone component in automatic mains failure (AMF) panels and generator transfer systems. As a sophisticated automatic transfer switch controller, it monitors two power sources (typically Mains/Grid and Generator) and automatically transfers the load to the healthy source.

However, without the Lovato 31 RGAM 12 user manual, this device is just a complex piece of hardware with a cryptic display and terminal blocks. The manual is not just a startup guide; it is the operational bible for the device. This article consolidates the most critical information found in the official user documentation, providing a deep dive into installation, programming parameters, error codes, and maintenance.

Disclaimer: This article is a detailed guide based on publicly available technical data for the Lovato 31 RGAM 12. For specific wiring diagrams, safety certifications, and the most recent firmware updates, always refer to the original Lovato Electric user manual. lovato 31 rgam 12 user manual

Chapter 1: Understanding the Lovato 31 RGAM 12

Before opening the manual, you must understand what the device does. The Lovato 31 RGAM 12 is part of the RGAM series of automatic transfer switch controllers. Key specifications include:

  • Monitoring: Three-phase voltage (3x230/400V AC) and frequency.
  • Logic: Microprocessor-based with customizable logic.
  • Display: LCD backlit screen showing voltages, frequencies, source status, and alarms.
  • Outputs: Relay outputs for generator start/stop (Magnet) and transfer commands (GCR, MCR).
  • Inputs: Digital inputs for remote test, emergency stop, and auxiliary contacts from circuit breakers.

The "31" often denotes a specific firmware or revision family, while "RGAM 12" refers to the model with 12A rated relay outputs for direct control of contactors or motorized circuit breakers. Lovato 31 RGAM/12 — Quick User-Manual Summary Introduction

Why you need the user manual: Unlike a simple light switch, the RGAM 12 requires configuration for your specific application. Do you want a delayed transfer? Do you need a cool-down timer for the generator? The manual holds the key to these settings.

6. Auxiliary Contacts and Control Circuit Integration

The 31 RGAM 12 includes built-in auxiliary contacts: Disclaimer: This article is a detailed guide based

| Contact | State in Normal | State in Trip | |---------|----------------|----------------| | 95-96 (NC) | Closed | Open | | 97-98 (NO) | Open | Closed |