Kt200 Ecu List May 2026

The KT200 ECU Programmer Go to product viewer dialog for this item. (and its successor, the Go to product viewer dialog for this item.

) is a comprehensive chip tuning tool that supports approximately 5,400 ECUs and over 500 TCUs. It is designed for reading and programming control units across cars, trucks, motorcycles, tractors, and boats. Core Capabilities & Supported Modes

The KT200 is valued for its versatility in how it interfaces with vehicle modules. It supports multiple communication protocols:

OBD Mode: Serial communication through the vehicle's diagnostic socket.

Bench Mode: Communication via pinout without opening the ECU cover. Boot Mode: Direct connection to the board for deep access.

BDM/JTAG: Specialized protocols for older or specific chip types (e.g., Toyota-Denso JTAG).

Full System Mode: Complete access via pinout for comprehensive data retrieval. Highlighted ECU Support List

The KT200 covers a massive range of manufacturers including Abarth, Alfa Romeo, Audi, VW, Ford, Mercedes, and Nissan. Key ECU series commonly supported include: kt200 ecu list

Bosch: Extensive support for EDC15, EDC16, EDC17, MED17, and ME series. Marelli: 8GMF, 8GSW, and other Fiat-group modules.

Continental/Siemens: PCR 2.1 (including OBD unlock), SIMOS, and SID series. Delphi: DCM series (e.g., DCM3.5, DCM6.2, DCM7.1A).

Denso: Used heavily in Japanese models like Suzuki and Toyota. Common Service Functions

Beyond simple reading and writing, the KT200 is used for technical engineering and maintenance tasks:

KT200 ECU Programmer 5,400 ECUs across cars, trucks, motorbikes, tractors, and boats. It covers major brands like Bosch, Continental, Delphi, Denso, and Marelli using OBD, Bench, Boot, BDM, and JTAG modes. 🚀 Key Supported ECU & TCU Series

The tool is frequently updated to include newer protocols. Below are the primary series supported: EDC17, MED17, ME17, EDC16, EDC7, ME9, MED9, MD1, MG1 DCM6.x, DCM7.x, CRD2.xx, CRD3.xx, MT-Series Siemens/Continental: SIMOS-Series, M-Series, S-Series, PCR2.1 (OBD unlock) 8GMF, 8GMC, 9GF, 8DF TCU (Transmission):

VAG DQ200, DQ250, DQ500, VL381, DL501; Mercedes 7G/9G Tronic; Volvo MPS6 Sail Teknoloji 🛠️ Connection Modes & Protocols The KT200 ECU Programmer Go to product viewer

KT200 offers multiple ways to interface with a vehicle's control unit: Bench Mode Full System:

Read/write Micro, Flash, and EEPROM without opening the ECU. Compatibility:

Widely used for Bosch (EDC17, MED17), Siemens PCR2.1, and Continental units. Boot & BDM/JTAG Boot Mode:

Supports C167, ST10, Tricore (TC17xx), Renesas (SH70xx), and Mitsubishi chips.

Covers Motorola MPC5xx, Nexus MPC/SPC56xx, Renesas, and NEC76F00xx series.

The KT200 ECU programmer covers a vast range of vehicle types including cars, trucks, motorcycles, tractors, and boats . It supports 5,400 ECUs

through multiple communication modes such as OBD, Bench, Boot, BDM, and JTAG. Supported ECU Brands and Series The tool is compatible with major global manufacturers: MED Series: MED9

KT200 ECU list refers to the comprehensive support catalog for the KT200 (and updated KT200 II) ECU programmer, a versatile tool used for reading, writing, and cloning Engine Control Units (ECUs) and Transmission Control Units (TCUs). The list currently covers over 5,400 ECU models and more than 500 TCU models across cars, trucks, tractors, and marine vehicles. OBD2gate.com Core Supported Protocols & ECU Types

The KT200 supports multiple communication modes, allowing for flexible access to a vehicle's data: : Direct reading/writing via the vehicle's diagnostic port. Bench Mode : Reading/writing via pinout without opening the ECU cover. : Direct connection to the ECU board (Tricore, ST10, etc.). : Serial communication for specialized controllers. Top Supported Brands & Models The tool supports major global brands including

Bosch, Continental, Delphi, Denso, Marelli, Siemens, and Temic . Key highlights from the 2026 support list include:

KT200 ECU Programmer Chip Tuning Tool Kit KT200 ... - Scribd

Here’s a structured feature idea for the KT200 ECU programming tool:

KT200 ECU List: Full Compatibility Guide for Programmers & Tuners

The KT200 is one of the most popular budget-friendly multi-brand ECU programming tools on the market. It supports reading, writing, and checksum correction for a wide range of engine control units (ECUs) from European, Asian, and American vehicles.

Below is the complete KT200 ECU compatibility list organized by manufacturer, including protocols and common usage notes.

1. Bosch ECUs (Most Extensive Support)

The KT200 shines with Bosch Motoronic and EDC families.

🇮🇹 Ferrari / Maserati / Fiat

| ECU Model | Protocol | Notes | |-----------|----------|-------| | Bosch ME7.3.1 | K-Line | Ferrari 360/430 | | Bosch ME9.7 | CAN | Maserati QP | | Marelli IAW 5SF | K-Line | Fiat/Alfa | | Marelli IAW 7GF | CAN | Diesel support |

PSA Group (Peugeot & Citroën)

4.3. Delphi / ACG

Safety & Legal Notes