The Iwata 2CRH is a versatile electronic time recorder featuring a dual-time display (front analog and top digital LCD) and two-color ribbon printing (black and red) to differentiate between regular hours and late arrivals. Key Specifications
Display: Dual display with front analog and top digital LCD. Printing: 2-color ribbon (Black/Red) for clear visibility.
Battery: Built-in backup battery for operations during power outages.
Power: Operates at 10W (active) and 2W (standby) via a DC13V 1A adapter. Iwata 2CRH Programming Guide
To enter programming mode, you must first unlock the top cover with the provided key. Locate the Program switch inside and slide it to the right (Programming position). 1. Setting the Date and Year
Navigate to Code 00 for the Year or Code 01 for the Month and Date. Use the + or - buttons to adjust the values. Press Enter to save the value and proceed. 2. Setting the Time (Hour and Minute)
Enter Code 03 or Code 04 (depending on your specific software version) to adjust the clock. iwata 2crh bundy clock manual
Press the + or - buttons to set the Hour. Press Enter to confirm.
Set the Minute using the same buttons and press Enter again. 3. Adjusting the Print Position
If the time stamps are not lining up correctly on your time cards, use the adjustment codes: Code 10: Vertical adjustment (Up/Down). Code 11: Horizontal adjustment (Left/Right).
Values range from 0–9; higher values move the print position up or to the right. Maintenance and Troubleshooting
Replacing the Ribbon: Correctly insert the new cartridge between the ribbon guide and the printer head. Push until it clicks, then turn the knob clockwise to tighten.
Error Code E2E2: This indicates a wrong position for the left/right carriage. Contact your dealer for service. The Iwata 2CRH is a versatile electronic time
Error Code E3E3: The internal battery needs to be charged or replaced.
Faint Printing: Ensure you are using genuine ribbons from Colent Marketing or authorized distributors to avoid damaging the printer head. Card Compatibility Iwata 2CRH
uses standard time cards with dimensions of (L) 85mm x (W) 188mm x (T) 0.35mm. It can detect the front and back of the card automatically (Code 12) to prevent incorrect punching. Iwata 2CRH Bundy Clock - Beyond Hygiene Asia
Iwata 2CRH is a dual-display automatic time recorder (bundy clock) designed for employee attendance tracking. It features both a traditional front analog face and a top digital LCD display. 1. Key Features and Specifications
: 2-color ribbon (Red/Black) to highlight late arrivals or early departures. : Front Analog + Top Digital LCD.
: Operates on a DC13V 1A adapter with a built-in backup battery for data and operation during power outages. Repairing a "Sluggish" Print:
: Programmable musical melody to signal work start or end times. Dimensions : 193 x 123 x 244 mm (L x W x H). : Standard 6-column time cards (85 x 188 x 0.35 mm). 2. Manual Setup and Configuration
To enter setup mode, you must unlock and remove the top cover using the provided key. Move the Program Switch to the right to begin programming. PIX-95 Operation Manual - the Amano Time Knowledge Base
The 2CRH uses a mechanical day/date wheel. To set:
Note: The clock does not auto-adjust for months or leap years. Adjust manually on the 1st of each month.
Most 2CRH models include a date wheel (Day/Month/Date).