Sharing Switch Driver |best| Download: Fjgear Usb 2.0
This is a complete guide to locating, understanding, and installing drivers for FJGear USB 2.0 Sharing Switches.
Because FJGear is a budget-friendly electronics brand often sold via Amazon, Newegg, or Walmart, their support pages can be difficult to find. This guide covers the likely scenarios you will face, from automatic installation to manual troubleshooting.
Troubleshooting instead of a driver
If the switch isn’t working:
- Power cycle – unplug USB from both computers and the device, wait 10s, reconnect.
- Test each port – plug device directly into computer → works? Good. Then try switch with a low-power device (USB mouse) first.
- Check for manual button – some models require you to press the physical button after switching computers.
- Avoid USB 3.0 ports on old switches – use USB 2.0 ports on your PC.
2. The "Chipset" Reality (Important)
FJGear does not manufacture the chips inside the switch. They likely use generic chipsets from manufacturers like MacroSilicon (MS), JMicron, or Realtek.
- If Windows or macOS fails to recognize the switch at all (showing as "Unknown Device"), you need the driver for the chipset, not "FJGear."
- Common Chipset IDs for these switches appear in Device Manager as
USB\VID_0BDA(Realtek) or similar. If you find this ID, search for that specific ID driver rather than "FJGear."
Safety and best practices
- Always safely eject mass storage devices before switching.
- Keep firmware/drivers from vendor site; avoid suspicious third-party executables.
- Scan downloaded files for malware.
Phase 5: Safety Warning on Driver Downloads
If you find a website claiming to have a specific "FJGear Driver Download" that is not on the official Amazon page or a verified file-hosting site (like Dropbox links provided by the seller): fjgear usb 2.0 sharing switch driver download
- DO NOT DOWNLOAD IT.
- Generic USB switches do not require executable (.exe) files.
- Fake driver sites often bundle malware.
Phase 1: Do You Actually Need a Driver?
Before searching for a file, it is important to understand how USB Sharing Switches work.
Most FJGear USB 2.0 switches are "Plug and Play." This is a complete guide to locating, understanding,
- The Device: The switch hardware itself usually does not require a specific driver to function. It acts as a passive bridge.
- The Computers: The computers connected to the switch simply see a USB device connected.
- The Peripherals: The keyboard, mouse, or flash drive you plug into the switch uses the drivers already installed on your computers.
The Test:
- Plug the switch into both computers.
- Press the button to select Computer A.
- Plug a mouse into the switch.
- Does the mouse work on Computer A?
- Yes: You do not need a driver download. The device is working.
- No: Proceed to Phase 2.