The Ez Grabber 2 (often referred to as the "Easy Grabber 2" or similar generic USB video capture dongles) is a legacy device designed to convert analog video (from VCRs, camcorders, or DVD players) into digital files for a computer. However, finding a safe, working driver for this device today is notoriously difficult.
Here is a practical guide to identifying your device and successfully (and safely) installing the drivers.
Official drivers for the Ez Grabber 2 were written for Windows XP and Vista. They are not digitally signed for modern Windows.
If you manage to find an .exe driver installer for Windows 10/11:
The better solution: Use a generic driver like UsbDk (USB Device Kit) combined with open-source software like OBS Studio or Amcap, which often recognize the raw video stream without the proprietary driver.
Cause: The Ez Grabber 2 contains both a video chip and an audio chip (CM108). Windows sometimes prioritizes the audio. Fix:
The Ez Grabber 2 represents a nostalgic era of DIY video digitization. While it can still work, the effort required often exceeds the value of the device itself. For most people, spending $60-$100 on a modern, supported capture device is a wiser investment of time and sanity.
This article is for educational purposes. Always respect copyright laws when digitizing video content. The author is not affiliated with any device manufacturer.
To download and install the official drivers for the Geniatech Ez Grabber 2 (also known as the iGrabber Live
), you should visit the manufacturer's dedicated support page. Ez Grabber 2 Driver Download
The official driver and software package (V1.30) is available for download at Geniatech USA. Step-by-Step Installation Guide Setting up the Ez Grabber 2
involves installing both the hardware drivers and the necessary capture software.
Download the Package: Obtain the V1.30 Driver for EzGrabber2. Hardware Connection : Connect your Ez Grabber 2
device to a USB 2.0 port on your computer. Use RCA or S-Video cables to connect your video source (like a VCR or camcorder) to the grabber.
Install Drivers: Run the installer from the downloaded folder. If prompted by Windows Security about unsigned drivers, select "Install this driver software anyway" to proceed. Verify in Device Manager: Right-click the Start button and select Device Manager. Look under "Sound, video and game controllers".
The device should appear as "USB Video Device" or "EZ Grabber" without any yellow exclamation marks. Install Capture Software: The Ez Grabber 2
often bundles with software like VHStoDVD or ArcSoft ShowBiz. These are essential for the "One Touch Capture" button to function and for digitizing your footage. Common Troubleshooting Tips
If you encounter issues such as flickering video or audio sync problems, consider these solutions found in user communities:
Driver Mismatch: If the device is not recognized, you may need to manually update the driver through the Windows Device Manager by pointing it to the specific folder where you extracted the Geniatech drivers. Navigating the Ez Grabber 2 Driver Download: What
Windows 10/11 Compatibility: Older versions of the software may struggle with modern OS security. Ensure you are using the latest V1.30 version, which offers better support for current Windows environments.
Audio Issues: If the audio breaks up during recording, users on the Microsoft Q&A forum suggest checking that the audio input settings in your capture software match the physical connection (RCA vs. 3.5mm).
Here's some good content regarding Ez Grabber 2 Driver Download:
Introduction
Ez Grabber 2 is a popular video capture device that allows users to capture video and audio from various sources such as TV, VHS, and DVD players. To use the device, you need to download and install the Ez Grabber 2 driver on your computer. In this article, we'll guide you on how to download and install the Ez Grabber 2 driver.
Why Do I Need to Download the Ez Grabber 2 Driver?
The Ez Grabber 2 driver is a software component that enables communication between your computer and the Ez Grabber 2 device. Without the driver, your computer won't be able to recognize the device, and you won't be able to use it to capture video and audio.
How to Download Ez Grabber 2 Driver
To download the Ez Grabber 2 driver, follow these steps: You will likely need to disable Driver Signature
Ez Grabber 2 Driver Download Links
Here are some direct download links for the Ez Grabber 2 driver:
How to Install Ez Grabber 2 Driver
Once you've downloaded the Ez Grabber 2 driver, follow these steps to install it:
Troubleshooting Tips
If you encounter any issues during the download or installation process, here are some troubleshooting tips:
Warning: Do not download drivers from random "driver update" pop-up ads. Many of these contain malware. Stick to the verified sources below.
A: No. Use the Empia EM2860 universal driver linked above. It works for virtually all clone devices labeled "Ez Grabber," "EasyCAP," "DVD Maker," or "USB Video Capture."